Cable Selection Guide
Choosing wire rope and rigging hardware starts with the complete system—not one part in isolation. Use this guide to narrow your options, then confirm the product page, package contents, measurements, supporting structure, and local requirements before installation.
1. Define the project
- Application: Identify what the cable will support, guide, tension, or suspend.
- Environment: Note indoor or outdoor use, moisture, salt exposure, pool chemicals, temperature changes, and contact with other metals.
- Span and adjustment: Measure the distance between finished anchor points and allow room for end fittings and tension adjustment.
- Supporting structure: Confirm that posts, walls, beams, and fasteners are appropriate for the intended installation.
- Maintenance access: Make sure connections can be inspected, cleaned, and re-tightened.
2. Choose the material
304 stainless steel is commonly used for general indoor and outdoor projects. 316 stainless steel generally offers better resistance in coastal, marine, poolside, or other chloride-rich environments. Stainless steel can still discolor or corrode when contaminated, exposed to aggressive chemicals, or installed in areas that retain moisture. Confirm the actual material listed for each component; do not assume every part in a kit uses the same grade.
3. Compare cable construction
Construction affects flexibility and handling. A 7×7 cable is moderately flexible and is often chosen for straight runs and general-purpose projects. A 7×19 cable is more flexible and better suited to applications involving pulleys or tighter bends. Construction alone does not establish a safe load rating. Use only verified product-specific values when a load requirement applies.
4. Decide between bare and coated cable
Bare stainless steel makes the metal surface easy to inspect. PVC-coated cable can improve handling and help protect nearby surfaces, but the coating changes the finished outside diameter and may hide corrosion or broken strands beneath damaged areas. When choosing clips, sleeves, thimbles, or pass-through holes, confirm whether the stated diameter refers to the bare cable or the coated outside diameter.
5. Match the fittings
- Turnbuckles: Check end style, thread size, closed length, open length, and available take-up.
- Clips and sleeves: Match the component to the cable diameter and follow the component manufacturer's assembly instructions.
- Thimbles: Match the groove to the cable and use them where an eye needs protection from a tight bend or rubbing.
- Shackles, hooks, eye bolts, and eye plates: Verify pin or opening size, attachment method, material, orientation, and the supporting structure.
- Tools: Use cutters and crimping tools designed for the cable and termination type.
6. Check the complete system
The safe capability of an assembly is limited by its weakest verified component and by the structure to which it is attached. Do not combine components solely because they appear to fit. Confirm material, dimensions, connection geometry, installation method, environment, and any applicable ratings.
Before ordering
- Record the required finished span.
- Record the bare cable diameter and, if coated, the finished outside diameter.
- List both end connections and the required adjustment range.
- Confirm every fitting and tool needed for assembly.
- Review the product page and contact Tootaci if a critical dimension is missing.
Safety note: Unless a product page explicitly provides verified ratings and approval for a specific application, do not use Tootaci products for overhead lifting, hoisting, towing, climbing, fall protection, personnel support, or other life-safety uses.
Need help comparing products? Contact Tootaci with your project type, environment, cable dimensions, and connection photos.


