Size & Compatibility Guide
Use this guide to compare wire rope, turnbuckles, clips, sleeves, thimbles, connectors, and mounting hardware. A visual match is not enough—record the actual dimensions and connection details before ordering.
Start with the cable
- Bare cable diameter: The diameter of the metal wire rope.
- Coated outside diameter: The finished diameter including PVC or another coating.
- Construction: For example, 7×7 or 7×19. Construction affects flexibility and how the cable works with bends and pulleys.
- Material: Confirm the listed grade or finish rather than assuming all stainless-looking parts are identical.
When a product lists two diameters, verify which one applies to the metal cable and which one applies to the finished coating.
Match clips, sleeves, and thimbles
Clips and sleeves must match the cable size and termination method. A sleeve intended for bare cable may not fit over a coating, and removing a coating can expose the cable or change how the termination performs. A thimble groove should support the cable without forcing it into a sharp bend or allowing excessive movement.
Measure turnbuckles correctly
- Thread size: Match mating threaded parts exactly.
- End configuration: Eye-eye, hook-eye, hook-hook, jaw, or another style.
- Closed length: Overall length at the shortest intended adjustment.
- Open length: Overall length while retaining safe thread engagement.
- Take-up: The usable adjustment between closed and open positions.
Do not choose a turnbuckle by body length alone. End fittings and thread engagement affect the finished length and connection.
Check connectors and mounting hardware
For shackles, hooks, eye bolts, eye plates, and pulleys, record pin diameter, internal opening, mounting-hole diameter and spacing, fastener type, and the direction of force. Confirm that each fitting can articulate without binding and that the supporting structure is appropriate.
Use one unit system consistently
Do not treat a rounded inch value as identical to a metric size. Convert dimensions carefully and compare the manufacturer's stated tolerance when available. If a fit is critical, measure the actual part with calipers.
Compatibility worksheet
- Product SKU or link
- Bare cable diameter
- Coated outside diameter, if applicable
- Cable construction and material
- Required finished span
- End fitting at each side
- Turnbuckle closed length and required take-up
- Connector opening or pin size
- Mounting surface and fastener type
- Indoor, outdoor, coastal, poolside, or chemical exposure
Ratings and safety
Physical fit does not prove load compatibility. Breaking strength and working load limit are different concepts, and neither should be estimated from appearance or from a similar product. Use only verified data for the exact product and installation. The complete system is limited by its weakest verified component and by the supporting structure.
If a critical dimension or rating is not shown, contact Tootaci before ordering or installation. Include measurements and photos, but do not include sensitive account or payment information.


